WEEK 14 FYP (SEM 2)

Objective            :

• ·         To prepare for presentation day
• ·         To present the project on presentation day

Content/Procedure        :

• ·       All Final Year Project degree Sem 2 and Diploma student have to present their final year project during the industrial day. I also have prepared to present about my Final year project on the industrial day. The details of the industrial day are shown below:

o   Date                       : 16^th May 2014

o   Day                        : Friday

o   Time                       : 8am – 12pm

o   Venue                     : Gemilang Hall at UniKL BMI

o   Competitors            : All FYP Degree Sem 2 and Diploma

• ·         Attendance is compulsory.

Result/Analysis :

• For this week, I need to prepare my presentation for the industrial day that will be held on Friday morning. I need to know the critical point information about my project and all the information that related to my project. I also need to finalize my prototype before I can present it on the industrial day. The industrial day will be held on Gemilang hall at UniKL BMi on Friday 16^th May 2014 from 8am to 12pm. The pictures below are proving that I attend the industrial day to present my project prototype and poster:

   

            

Conclusion          :

• For the conclusion on this week, I have successfully done the objective for this week. I have done present my project prototype and poster on the industrial day. I also have successfully answered the question that has been given to me by the accessor.

WEEK 13 FYP (SEM 2)

Objective            :

• ·         To produce project poster
• ·         To present the project in front of supervisor and final check with supervisor

Content/Procedure        :

• ·       The poster to be present during the presentation day regarding of the project have been made.
• ·     The project has been presented in front of supervisor before the presentation week. The details are shown below:

o   Date      : 8^th May 2014

o   Time      : 3pm – 4pm

o   Places   : Level 2 corridor at UniKL BMI

Result/Analysis :

• For this week, I need to make a poster to be presented on the industrial presentation day regarding of my project. This poster is very important because it will explain about the entire project that I make on this semester. The things should be written on the poster is:

·         Objective

·         Methodology

·         Abstract

·         Result

·         Conclusion

·         Reference               

• Other than that I also have to present my project in front of my supervisor. I need to show the project functionality and ask my supervisor on his opinion about how to improve my presentation. Below show the poster that I have been made for the presentation day:

Conclusion          :

• For the conclusion on this week, I have successfully done the objective for this week. I have done doing my FYP poster and I also have done presented my project in front of my supervisor. By meeting my supervisor, I am improvising my presentation regarding of his advice.

WEEK 12 FYP (SEM 2)

Objective            :

• ·         To find extra information regarding of the project
• ·         To write important information regarding of the component used

Content/Procedure        :

• ·    The extra information for this project is needed to be presented during the industrial day. The information regarding as below:

o   Component used

o   Function of component

o   Concept used in the project

Result/Analysis :

• For this week, I need to take note all the important component is used during the process of making my project. The component used in this project is important to take note because it was determine the basic process of the component functionality for this project. The concept of my project also is very important because regarding of the rule of Final Year Project, I should use the concept that I learn from my subject during the study on UniKL BMI. So, I have decided to use a transceiver concept to create a wireless environment. It is related to my programmed I take on UniKL BMI which is Bachelor of engineering technology (HONS) in Data communication. I also find new information that I don’t know.

               

Conclusion          :

• For the conclusion on this week, I have successfully done the objective for this week. I have done writing the entire important information regarding my project. I also have successfully learn the new information that I lacking of knowledge.

WEEK 11 FYP (SEM 2)

Objective            :

• ·         To produce the report draft.

Content/Procedure        :

• ·     The progress of the report draft is needed during the completing of the project prototype. The report progress needed is:

o   Abstract              

o   Introduction

o   Objective

o   Result

Result/Analysis :

• For this week, I need to write for a report draft regarding of the project I make. The report draft is needed during a making of poster for industrial day on week 14. All of the information is important because it will be presented in front of the supervisor and accessor. The report draft written is shown as below:

ABSTRACT:

The ‗Remote Security Alarm with Tracker‘ is a project to keep children safe from missing, lost or kidnapping. Nowadays, safety is the most important issue that we always heard in everywhere. In our live, we need something to protect our child. Thus, I develop something novel which is wireless child safety harness with tracker. This is because the traditional child safety harness is not user friendly, which the parents have to attach a rope at their hand to their children harness. My objective is also to upgrade the existing child harness from rope child harness to wireless child harness. The advantage of having a Wireless Child Safety Harness is due to no medium attaches between the parents and the children which result in free movement during their activity. By using this invention, the parents can freely do their activity in a crowded environment such as in hypermarket during sales. The Wireless Child Safety Harness with ‗Remote Security Alarm‘ fixtures consist of RF chokes as a sensor that detects signals from both transmitter and receiver circuits. I also have used two ICs which are NE567N and HEF4001BP for these circuits. These two ICs are frequency and tone decoder that commonly used in RF frequency circuits. We believe that this project can reduce the number of missing children or kidnapping.

INTRODUCTION:

This project is to develop the security devices for children which named ―Wireless Child Safety harness with Tracker‖. Nowadays, there are too much news about missing children or kidnapping that can be heard on the television, radio, internet or any others media. So, the idea to design something that can be used to solve this problem has come up. This wireless child safety harness with tracker is actually the upgrade of the existing child harness in the market nowadays. The traditional child safety harness which has been used in today‘s world is the usage of rope attaching children to their parents. From the concept of old design of safety harness, the idea is to have it upgraded to become more advanced devices that will make people feel comfortable to using the tracker. So, the wireless child safety harness with GPS tracker has been designed to protect child from missing or kidnapping in the busy environment and also informing the location of the child via GPS system. Wireless child safety harness with tracker is the device that will monitor children in a certain range. This is to ensure that the child is still in a safe area and also still in a close range to their parents. So we came up with the idea to create the project we believe that this device is very user friendly, intuitive and comfortable to use and operate. The device can be held or brought anywhere because of its lighters and small size. The power supply use is 9V battery for both of the circuits. The receiver and alarm circuits will use the same battery. The alarm circuit will activate and give a warning sound if the receiver is not receiving a signal from the transmitter. The warning alarm is meant for the parents when their children are far away from them. The GSM GPS system is attached to the transmitter circuit and will also automatically activated when the transmitter is out of range from the receiver.

OBJECTIVE:

In this busy environment, parents sometimes neglect the importance of their children safety. The main objective of this project is to develop wireless child safety harness with remote security alarm fixtures and tracker device. The purpose of this invention is:

1. i. To protect the children from being missing or kidnapped especially in crowded place such as shopping complex.
2. ii. To allow parents freely do their activities such as shopping, working while the kids are monitored with the device.
3. iii. To upgraded the existing child harness from rope child harness to wireless child harness.
4. iv. To make parents and child feel comfortable and easy to bring that devices because it was small and light.

It is believed that this project can reduce the number of missing children or kidnapping. It is also right to be indispensable technology goods in the today‘s world.

RESULT:

Conclusion          :

• For the conclusion on this week, I have successfully done the objective for this week. I have done the report draft and the information I needed to put in my poster during the presentation day.

WEEK 10 FYP (SEM 2)

Objective            :

• ·         To make a video regarding the project.
• ·         To troubleshoot the project functionality.

Content/Procedure        :

• ·      The video of the project need to be produced for a backup if the project are not functioning well during the FYP presentation day. The details are shown below:

o   Date of produce               : 16th April 2014

o   Places                              : Mutiara Gombak

o   Time                                : 5pm - 6pm

o   Project condition              : Good

• ·      The project also needs to be troubleshooting during the making video process. It is because the process of making video needs the functioning well circuit to be presented.

Result/Analysis :

• For this week, I need to make a video about my project functionality. This video is needed as a backup during the FYP presentation day if my project has some problem during the presentation. So, the functionality of my project can be presented to the accessor on that day as a proof of my project function. I also troubleshoot the circuit during the making video progress. It is because the circuit need to be fully function even though it just a prototype. Below shows the picture and video of the project prototype device:

               

Conclusion          :

• For the conclusion on this week, I have successfully done the objective for this week. I have done making a video for backup during presentation day. I am also done troubleshooting the device lacking during the process of making it.

WEEK 9 FYP (SEM 2)

Objective            :

• ·         To Buy the classic child safety harness with rope
• ·         To attach the GPS GSM Tracker Device into transmitter circuit.

Content/Procedure        :

• ·         The classic child safety harness was bought online. The details are shown below:

o   Web pages              : groupme.com.my

o   Date buying            : 8th April 2014

o   Price                      : RM23.90

o   Type                       : Ladybird

• ·         The GPS GSM Device need to be attached at transmitter circuit. GSM GPS Tracker Device is used to track the location of the transmitter.

Result/Analysis :

• For this week, I have do some survey to buy the classic child safety harness and also to buy the GSM GPS Device. The Classic child safety harness is needed for my presentation on the FYP presentation day on week 14. The GSM GPS tracker Device need to be attach to the transmitter circuit because the transmitter circuit will be hold by the user child. So, in case the child was missing and there’s no sign the child are nearer the missing place, the GSM GPS Tracker Device will be needed to track the location of the transmitter. User need to call the GSM GPS Device to get the information regarding the current location of the transmitter. Below shown the Classic child safety harness and the GSM GPS Tracker Device:

               

Conclusion          :

• For the conclusion on this week, I have successfully done the objective for this week. I have done buying the classic child safety harness to be presented during industrial day. I also successfully tested the compatible between the GSM GPS Tracker Device with Transmitter circuit to be attached this device together. The device are being attached together and ready to been tested.

WEEK 8 FYP (SEM 2)

Objective            :

• ·         To Itching and solder alarm circuit
• ·         To attach alarm circuit into receiver circuit
• ·         To test GSM GPS System functionality

Content/Procedure        :

• ·      Itching and solder the alarm circuit into the itching board. Then testing the alarm circuit functions and makes it connected together with receiver circuit. After that, the GSM GPS System have been test and been configured. The details are shown below:

o   GSM GPS Test    : Using laptop to registered and configured the places.

o   Date                     : 2nd April 2014

o   Software used       : GPS Tracker Version 2.0.0.0

o   Accuracy              : 95% accurate based on internet and GPS

o   Delay time             : Less than 30 seconds the message arrived

o   Maps type             : Google maps

Result/Analysis :

• For this week, I need to make the alarm circuit and connected it together with the receiver circuit. The function of the alarm circuit is to warning this device user and makes them alert if the transmitter is far away from them. Other than that, I also test the GSM GPS Tracker System that has been used in my project. The function of this GSM GPS System is to track the transmitter location within a second. It can help to prevent the transmitter user from being missing. There is some software use to configure the GSM GPS Tracker Device to specify the user country. The GSM GPS Tracker device function is when the user makes a call to the Tracker device, the device will automatically responding and gives a message to the user smart phone less than 30 second. So the user can automatically track the device current location at that time. The picture of the device is shown below:

               

Conclusion          :

• For the conclusion on this week, I have successfully done the objective for this week. I have done soldering the alarm circuit and connected it together with the receiver circuit. I am also have done configuring and testing the GSM GPS Tracker device to been used on my project. The purpose of this project is to prevent the transmitter device from being missing.

WEEK 7 FYP (SEM2)

Objective            :

• ·         To Buy alarm circuit and GSM GPS System
• ·         To find suitable material to make the circuit casing.

Content/Procedure        :

• ·         The alarm circuit and material for casing has been bought and details are show below

o   Bought place      : Jalan Pasar

o   Date                  :

o   Shop name         : Nixie

• ·         The GPS GSM Device has been bought at Maxisegar building at Pandan Indah. The details are shown below:

o   Bought place      :

o   Date                  :

o   Shop name         :

Result/Analysis :

• For this week, I have to buy the component for alarm circuit and GSM GPS system product to attach on my project. I have already made a research about this product through the internet. Other than that, I also have bought the material needed to make a casing for my project.  The pictures below showed the product that I bought:

               

Conclusion          :

For the conclusion on this week, I have successfully achieved my objective which is to buy alarm circuit, GSM GPS system and also the material to make a casing for my project. The entire product has been bought separately on different shop and different places. I also have made some comparison between the shops to find the better price.

WEEK 6 FYP (SEM 2)

Objective            :

• ·         To attach and solder the component on the itching Board
• ·         To test the circuit functionality after soldering

Activities              :

• ·         For this week, I need to attach the component on itching board and solder it. I have done it tidily and neat to make sure it will function well and easy to recheck if there is any problem happened.

Analysis                :

   

•      The component have been attach on the itching board like the picture shown below. I have made a test of the connectivity between the transmitter and receiver and I have to make sure the circuit functioning well. There is some problem occur when I trying to find the suitable frequency for both of the transmitter and receiver. I also have to make sure it functioning well and take note on it maximum range it can reach.

Conclusion          :

For the conclusion on this week, I have successfully done the objective for this week. I have done soldering component and doing my circuit on the itching board and test the functionally of the circuit. 

WEEK 5 FYP (SEM2)

Objective            :

• ·         To start doing the itching on the itching board
• ·         To attach the components on itching board

Content/Procedure        :

• ·         Start doing itching on itching board.

o   Material use       : 

§  Itching Board

§  Acid

§  Marker pen

§  Ruler

§  Drill

• ·         Draw Circuit on Itching Board
• ·         Drill hole on Itching board

Result/Analysis :

• For this week, I have doing the itching on itching board. I also doing the drill on itching board to make hole to the component attaching. I have to make sure the itching done well before I can solder the component on the itching board. To make the itching on the itching board, there are some tools I have used for the itching. The tools are state above:

Ø  Itching Board

Ø  Marker pen

Ø  Acid

Ø  Ruler

• By doing the itching, I can make my circuit become smaller and easy to bring anywhere. It was better than doing on strip board because there are many thing to be considered when doing on strip board.

Conclusion          :

For the conclusion on this week, I have successfully doing the itching by using the tools that I state before. All the objective on this week have successfully done. The itching board are ready after I make a hole to attach the component.

WEEK 4 FYP (SEM2)

Objective            :

• ·         To testing the circuit in Breadboard
• ·         To make sure the circuit functioning well

Content/Procedure        :

• ·         Both of the circuit have to been testing on breadboard before solder it into itching board.

o   Circuit Type        : Transmitter & Receiver

o   Braedboard         : 2

o   Baterry use         : 9V=2 , 1.5V=2

o   Jumper               : 4 colour

Result/Analysis :

• For this week, I need to attach the component on Breadboard and test the circuit functionality based on the drawing circuit I have made before. I will test the connectivity between the transmitter and receiver and the range it could reach. The component have been attach on the breadboard like the picture shown below. I have make a test of the connectivity between the transmitter and receiver and I have to make sure the circuit functioning well.

              Transmitter :

    o   Functioning well

Receiver :

    o   Functioning well

               

Conclusion          :

For the conclusion on this week, I have successfully done the objective for this week. I have done doing my circuit on the breadboard and test the functionally of the circuit.

WEEK 3 FYP (SEM 2)

Objective            :

• ·         To Brief on FYP Progress, FYP Assessment & FYP Project Progress.
• ·         To make sure everyone attend the FYP Briefing.

Content/Procedure        :

• ·         All FYP Degree Sem 2 students are required to attend the briefing as follow

o   Date      : 28^th February 2014 (Friday)

o   Time      : 3.00pm – 4.00pm

o   Venue    : TTL2

• ·         The attendance is Compulsory.

Result/Analysis :

       1)      This meeting was held by FYP committee :

Ø  Miss Nurul Fazlin Binti Roslan

Ø  Dr. Muhammad Noor Bin Nordin

  

       2)      FYP Logbook & Progress :

Ø  Students need to update the logbook / blog regularly.

Ø  Students can refer to the assessment criteria.

Ø  FYP progress should be implementation of prototype.

       3)      FYP Attendance :

Ø  Students must meet Supervisor for consultation (min. 5 times)

Ø  Attendance that below than 80% will be barred.

       4)      FYP Assessment :

Ø  Progress report (blog)                                                   20%

Ø  Presentation & Demonstration                                       40%

Ø  Final Year Project Report                                              40%

Ø  Total                                                      :                    100%

       5)      Industry Day :

Ø  Presentation and Demonstration of FYP Prototype will be held on week 14, Friday (16/5/2014).

Ø  Students have to prepare FYP poster and prototype.

        6)      Final project report :

Ø  Student should submit the draft of complete project report to FYP supervisor on week 15.

Ø  Students can print the final project report in hard cover once there is no grammar error in the report content.

Ø  Students must refer assessment criteria for report format.

Conclusion          :

For the conclusion on this week, the briefing was done by Miss Nurul Fazlin bin Roslan. The contents of briefing were clearly understood by students. The objective was successfully achieved.